CnC 8 x 4 Plasma profiling machine complere with Hypertherm powermax 45 plasma cutter

This looks like it has been tested prior to delivery but pretty much un-used
It is being sold as disassembled, as can be seen in the pictures and as described below.

From my research I think this is an 8 foot x 4 foot CNC table sold by Rapid fab Equipment, generally sold on Ebay and this comes complete with a un-used Hyper therm plasma torch set.
I believe this this was delivered and stored as you see it now, but never used.
There is some small signs of use on the torch and torch carrier but I think this was initial factory testing. It has not been used since purchased by the owner who has since sadly passed away.

CNC table:
It look like a 8×4 table, all the bits look to be there but it is sold as per the pictures, and should look similar / like the one in the picture I found online for reference.
It has a water tray which was stored outside so has a layer of rust on it, but that is no issue as these trays get covered in molten metal during cutting..
there are not slats for the water table, but this would be a great first job project for you to quickly cut your own to suit.
The rest of the parts look great as per images.
I took the cover off the controller so you can see inside.
The controller board inside looks to be a razordance DTHC,  and i think it simply runs of Mach 3 via a standard PC, which is not included but can be downloaded for free online.
There is lots of help online in the forums about setting up Mach 3 on plasma machines.
The cables look to be marked up, and it all  looks pretty straight forward to put together.
But it is being sold as seen and un-tested.

Hypertherm powermax 45 plasma cutter:
This is still in it’s box, again it shows a slight bit of use most likely form the initial trial prior to the delivery of the initial purchase on this machine, but is pretty much unused.
It has a 3 phase plug on it, I do not know if it is duel voltage as often units like this are.
It comes with the machine cutting head,  But also a brand new hand held torch, and some un-opened consumables. All as per the pictures

Air compressor:
Whilst this does not include an air compressor, I do have one coming up for sale that should work with this, so if still for sale at the time you purchase this you can purchase a complete package!.

This is the perfect purchase for someone that has a little computer knowledge to sort the Mach 3 controller out and set it up, And wants a machine at a fair price.

It looks great, pretty much un-used and seemly all there, but it is being sold as seen in the photos and un-tested.
So make me a fair and reasonable market based offer and if acceptable it yours to play with.

This is part of a workshop clearance and is located in Woking , UK

We are open to offers based on current market value.
Please make your best offer of what it is worth to you.
Silly offers will not be replied to.